![]() |
Communication modules and servers |
| SENA Technologies is a leading manufacturer of Device Server product line that includes external, embedded, wireless and industrial device servers and Industrial Bluetooth product line that includes Bluetooth serial adapters, Bluetooth serial modules and Bluetooth IP gateways for device networking solution in the areas of IT/Telco, retail/POS, industrial automation, building automation and medical automation. | |
| More information you can find on Sena web site www.sena.com. | |
|
Product groups |
|
|
Industrial Bluetooth solutions |
Device servers |
Embedded
Bluetooth modules NEW! Bluetooth v2.0+EDR module ON STOCK! |
Wireless and External Device Servers |
| For detail technical information please visit Sena's web site www.sena.com or send e-mail to support@comet.bg. | |
| For additional information about prices and delivery terms for ordering Sena products, please contact Comet Electronics! | |
|
Embedded Bluetooth modules |
| SENA offers you the newest RoHS versions of well known Bluetooth modules Promi-ESD-01 and Promi-ESD-02. The Parani-ESD modules offers easy integration and excellent performance for your Bluetooth enabled design.Compact embedded Bluetooth modules with excellent performance and reasonable price. Managed through standard serial port and AT Commands, Parani-ESD modules are easily implemented in every design. |
| The name of each product in the table below contains а link to the datasheet in .pdf format. |
|
Parani-ESD embedded Bluetooth modules |
|||||
|
Product
|
|
|
|
|
|
| Parani-ESD1000 | |||||
![]() |
|
|
|
|
|
|
Price |
|
|
|
|
|
|
Description |
OEM Bluetooth-UART module with RPSMA antenna connector |
OEM Bluetooth-Serial Module with on-board antenna |
OEM Bluetooth-Serial Module with MMCX antenna connector |
OEM Bluetooth-Serial Module with on-board antenna |
OEM Bluetooth-Serial Module with MMCX antenna connector |
|
Bluetooth Interface |
Bluetooth V2.0+EDR Class I, |
Bluetooth v1.2 Class I Level - Max 18 dBm Protocols - RFCOMM, L2CAP, SDP Profiles - General Access Profile, Serial Port Profile |
Bluetooth v1.2 Class 2 |
||
|
Max. Tx power |
+18dBm |
+4dBm |
|||
|
Receive Sensitivity |
-88dBm |
-80dbm |
|||
|
RF Range |
Default ant. - Default ant. 100m Default ant. - Dipole ant. 150m Dipole ant. - Dipole ant. 200m Patch ant. - Dipole ant. 600m Patch ant. - Patch ant. 1000m |
Nominal 100m |
Default Antenna -
Default Antenna 100m |
Nominal 30m |
Default Antenna -
Default Antenna 30m |
|
Connector |
2.0 mm Header 2x14 |
2.54mm Header 2x6 |
2.54mm Header 1x4x2 |
||
|
Operating temperature |
-30°C to 55°C |
-10°C to 55°C | |||
|
Power supply |
3.3V |
||||
|
Serial Interface |
UART (3.3V), to 921.6 Kbps |
UART, 1200 bps ÷ 230 Kbps | |||
|
Approval |
FCC, MIC |
||||
|
Dimensions (HxWxD) |
49 x 23 x 11 (mm) |
27.5 x 27.7 x 14 (mm) |
18 x 20 x 11.7 (mm) |
||
|
Technical downloads |
Click here for technical information download page | ||||
| For detail technical information please visit Sena's web site www.sena.com or send e-mail to support@comet.bg. |
| For additional information about prices and delivery terms for ordering Sena products, please contact Comet Electronics! |
|
Bluetooth-Serial Adapters |
| External type Bluetooth serial adapter with DIP-Switch and Pairing button (for convenient configuration and Pairing) for RS232 cable replacement. |
| The name of each product in the table below contains а link to the datasheet in .pdf format. |
| Parani-SD Bluetooth-Serial Adapters | ||
|
Product
|
|
|
![]() |
![]() |
|
|
Price |
|
|
|
Serial Interface |
RS232, Female DB9, 1200~230 Kbps CTS/RTS flow control: Default, DTR/DSR for loop-back & full transfer |
|
|
Bluetooth Interface |
Bluetooth v1.2, Class 1, Level - 18 dBm |
Bluetooth v1.2, Class 2, Level - Max. 4dBm |
|
RF Range |
Default Antenna - Default Antenna 100 meters |
Default Antenna - Default Antenna 30 meters |
|
Max. Tx power |
+18dBm |
+4dBm |
|
ReceiveSensitivity |
-88dBm |
-80dbm |
|
Antenna gain |
Stub : +2dBi, Dipole : +4dBi, Patch : +8.5dBi |
|
|
Diagnostic LED |
Power, Standby, Connect, RS232-Tx, RS232-Rx |
|
|
Power |
5V~12V DC, minimum 300mA nominal power consumption of 60mA@9600bps and
81mA@115Kbps speed |
5V~12V DC, minimum 150mA nominal power consumption of 58mA@9600bps and
66mA@115Kbps speed |
|
Common Power supply options: Power via a standard AC-plug DC-adapter, Power via DC power cable, Power via pin 9 of DB9 connector, Battery Pack for SD200 only |
||
|
Environmental |
Operating temperature: -10°C to 55°C Humidity: 90% Non-condensing |
|
|
Dimension (LxWxH) |
96 x 31 x 16 (mm) |
101 x 31 x 16 (mm) |
|
Approvals |
FCC, CE, TELEC, MIC |
|
| Technical downloads | Click here for technical information download page | |
| For detail technical information please visit Sena's web site www.sena.com or send e-mail to support@comet.bg. |
| For additional information about prices and delivery terms for ordering Sena products, please contact Comet Electronics! |
|
Industrial Bluetooth Access Point |
| Industrial Bluetooth Access Point with virtual serial port support. A RoHs compliant replacement for Promi-MSP-02 Bluetooth Access Point |
| The name of each product in the table below contains link to the datasheet in .pdf format. |
| Industrial Bluetooth Access Point | ||||||||||||||||||
|
Product
|
|
|
||||||||||||||||
|
Price |
|
|||||||||||||||||
|
Ethernet Interface |
Dual 10/100 Base-T Ethernet with RJ45 connector |
10/100 Base-T Ethernet with RJ45 connector |
||||||||||||||||
| Supports Static IP and Dynamic IP address |
Supports Static IP and Dynamic IP address |
|||||||||||||||||
|
Bluetooth Interface |
Bluetooth v2.0 + EDR
Class 1, |
Bluetooth v2.0, Class 1, Level - 18dBm |
||||||||||||||||
|
RF Range |
|
Note : USB Extension dongle - Nominal 150 meters. |
||||||||||||||||
|
Max. Tx power |
+17dBi(using DAT-G01R Antenna) |
+18dBm |
||||||||||||||||
|
Receive Sensitivity |
-88dBm |
-88dBm |
||||||||||||||||
|
Antenna gain |
DAT-G01R(Default) : +3dBi, DAT5-G01R : +5dBi, PAT-G01R : +9dBi |
Dipole : +4dBi, Patch : +8.5dBi |
||||||||||||||||
|
Point to multi point connectivity |
Up to 28 connections |
7 (Up to Max. 14 point using USB extension dongle) |
||||||||||||||||
|
Network Protocols |
IPv4, ICMP, ARP, TCP, HTTP, telnet, TFTP SSH, HTTPS, SSL/TLS, DNS SCP/SFTP/FTP, syslog, NTP SNMP, SMTP, Dynamic DNS |
HTTP, TFTP, Telnet, DHCP Server/Client, SNMP v1/v2/v3, PPP server and PPP tunneling, RADIUS |
||||||||||||||||
|
Diagnostic LED |
Signal Strength, No of Connections |
POWER, STATUS, ERROR, EXT, INT |
||||||||||||||||
|
Power |
5VDC |
5VDC |
||||||||||||||||
| 1.2A@ 5VDC approximately |
2A@ 5V |
|||||||||||||||||
|
Environmental |
Operating temperature: 0'C to 50'C Humidity: 90% Non-condensing |
Operating temperature: 0°C to 50°C Humidity: 90% Non-condensing |
||||||||||||||||
|
Dimension (LxWxH) |
203 x 170 x 44 (mm) |
147 x 112 x 32 (mm) |
||||||||||||||||
| Weight:
MSP1000A - 1414g,
MSP1000B - 1432g MSP1000C - 1468g |
Weight: 225g |
|||||||||||||||||
|
Approval |
FCC, CE, MIC, Telec |
FCC, CE, TELEC, MIC |
||||||||||||||||
| Technical downloads | Click here for technical information download page | Click here for technical information download page | ||||||||||||||||
| For detail technical information please visit Sena's web site www.sena.com or send e-mail to support@comet.bg. |
| For additional information about prices and delivery terms for ordering Sena products, please contact Comet Electronics! |
|
Wireless and External Device Servers |
| Sena offers Built-in Wireless LAN, Built-in Bluetooth Wireless Technology and PC Card supported device servers for wireless device networking. Sena's external Device Servers products are single-port and multi-port serial to Ethernet communication devices that enable existing devices with a serial port to connect to the Internet quickly and cost-effectively. |
| The name of each product in the table below contains a link to the datasheet in .pdf format. |
|
Wireless and External Device Servers |
|||||
|
Product |
|
|
|
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
Price |
|
|
|
|
|
|
Serial Interface |
1-port |
4-port |
8-port |
1-port |
1-port |
|
Serial speeds 75bps to 230kbps |
Serial speeds: 1200bps to 115Kbps |
||||
|
DB9 connector |
Male DB9 serial port |
||||
|
Flow Control: Hardware, Software |
Flow Control: Hardware RTS/CTS |
||||
|
Signals: RS485: 2/4-wire RS232: Rx, Tx, RTS, CTS, DSR, DTR, DCD, GND RS422: Tx+, Tx-, Rx+, Rx-, RTS+, RTS-, CTS+, CTS- |
Signals: RS232: Rx, Tx, RTS, CTS, DTR, DSR, GND |
||||
|
Network Interface |
10/100 Base-T Ethernet with RJ45 Ethernet connector |
10 Base-T Ethernet with RJ45 Ethernet connector |
802.11b WiFi with Prism III compatible chipset |
||
|
Supports static and dynamic IP address |
|||||
|
Protocols |
ARP, IP/ICMP, TCP, UDP, Telnet/SSH |
ARP, IP/ICMP, TCP/IP, Telnet, DHCP client, PPPoE |
ARP, IP/ICMP, TCP/IP, Telnet, DHCP client |
||
|
Serial Port Access protocol : |
Serial Access port protocol : Raw TCP |
||||
|
Security |
SSH, SSL, IP address filtering, HTTPS |
User ID & Password, IP address filtering-LS100W only |
|||
|
Management |
Web, Console port, Telnet/SSH, HelloDevice Manager software, O/S support: Windows 98/ME/NT/2000/XP |
Telnet, Serial console port |
|||
|
Diagnostic LED |
Power, Link, Serial Rx/Tx for each serial port |
Power, Link, Act, Serial Rx/Tx for each serial port |
Power, Ready, Link, Act, Serial Rx/Tx for each serial port |
Ready, Link and Act for, Ethernet, Serial Rx / Tx, Power |
Power, Link and Act for WiFi, Serial Rx / Tx, Ready |
|
Power |
9~30VDC, 0.35A @ 9VDC |
9~30VDC, 0.4A @ 9VDC |
100~240VAC, 50/60Hz, 0.24A |
7.5V ~ 15V DC |
9V ~ 30V DC |
|
Environmental |
Operating temperature: 0°C to 50°C |
||||
|
Humidity: 90% Non-condensing |
|||||
|
Physical properties |
113 x 82 x 27 (mm), 300g |
227 x 119 x 28 (mm), 750g |
438 x 120 x 45 (mm), 1.5kg |
100x 72 x 25 (mm), 240g |
100 x 72 x 25 (mm), 300g |
|
Certification |
FCC (A), CE, MIC |
||||
| Technical downloads | Click here for technical information download page | Click here for technical information download page | |||
| For detail technical information please visit Sena's web site www.sena.com or send e-mail to support@comet.bg. |
| For additional information about prices and delivery terms for ordering Sena products, please contact Comet Electronics! |
|
Embedded Device Server Module with built-in UART |
| Single-chip DIL type Ethernet controller for onboard installation, with Built-in UART for device interface and data transfer rate up to 115Kbps. |
| The name of each product in the table below contains link to the datasheet in .pdf format. |
|
Embedded Device Server Module with built-in UART |
||
Product |
|
![]() |
| Hardware | 80C51 8-bit microprocessor | |
| 32KB SRAM | ||
| 64KB EEPROM | ||
| External Interface Pins | 24 pin Dual In Line connector interface for UART, LED, Ethernet, Power | |
| Device Interface | Built-in UART | |
| Serial speeds 1200bps to 115Kbps | ||
| Flow Control: Hardware RTS/CTS | ||
| Signals: Rx, Tx, RTS, CTS, DTR, DSR, GND | ||
| Network Interface | 10 Base-T Ethernet | |
| Supports static and dynamic IP address | ||
| Protocols | ARP, IP/ICMP, TCP, Telnet, DHCP client, PPPoE | |
| Security | User ID & Password | |
| Management |
Telnet, Serial console port, HelloDevice Manager |
|
| Power | Supply voltage = 5V DC 10% | |
| Supply current = 60mA / 5V DC | ||
| Environmental | Operating temperature: 0°C to 50°C | |
| Humidity: 90% Non-condensing | ||
| Physical Properties | Dimension (LxWxH): 45 mm x 45 mm x 18.5 mm | |
| Weight: 20g | ||
| Technical downloads | Click here for technical information download page | |
| For detail technical information please visit Sena's web site www.sena.com or send e-mail to support@comet.bg. |
| For additional information about prices and delivery terms for ordering Sena products, please contact Comet Electronics! |
|
Device servers with Embedded Linux support |
| Sena offers Embedded Linux based Device Servers products with single and multiply serial ports and Ethernet communication port that enable serial devices to connect to the Internet or to other Ethernet based networks. |
| The name of each product in the table below contains a link to the datasheet in .pdf format. |
| Device servers with Embedded Linux support | |||||
| Product |
|
|
|
|
|
![]() |
![]() |
![]() |
![]() |
||
|
Price |
|
|
|
|
|
|
CPU |
MPC 855T 32-bit RISC CPU, 50Mhz |
||||
|
DRAM |
64 MB ( 4 MB of user programmable space ) |
32 MB ( 4 MB of user progr. space ) |
|||
|
Flash |
8 MB ( 1 MB of user programmable space ) |
||||
|
Serial Interface |
Ports |
4-port, RJ45 connector |
8-port, RJ45 connector |
4-port, RJ45 connector |
1 port DB9 connector |
|
Data speed |
Serial speeds 75bps to 230Kbps |
||||
|
Flow Control |
Hardware, Software |
Hardware RTS/CTS, Software Xon/Xoff |
|||
|
Signals |
RS232: Rx, Tx, RTS, CTS, DTR, DSR, GND |
RS485: Data+, Data-, RS232: Rx, Tx, RTS, CTS, DTR, DSR, DCD, GND RS422: Rx+, Rx-, Tx+, Tx- |
|||
|
Network Interface |
10/100Base Ethernet with RJ45 Ethernet connector |
||||
|
Supports static and dynamic IP address |
|||||
|
Network Protocols |
ARP, IP/ICMP, DNS, Dynamic DNS, SMTP with/without Authentication, pop-before SMTP, DHCP client, NTP, PPPoE, TCP, UDP, SSL v2 & v3, TLS v1, RFC-2217, SSH v1 & v2,Telnet, HTTP, HTTPS, SNMP v1 & v2 |
ARP, IP/ICMP, DNS, Dynamic DNS, SMTP with/without Authentication, pop-before SMTP, DHCP client, NTP, PPPoE, TCP, UDP, SSL v2 & v3, TLS v1, RFC-2217, SSH v1 & v2,Telnet, HTTP, HTTPS, SNMP v1 & v2 |
|||
|
Serial Port Access protocol : Telnet, TCP, UDP, SSL v2 & v3, TLS v1, RFC-2217 |
|||||
| Embedded Linux |
File System |
CRAMFS, JFFS2, NFS, EXT2, VFAT/FAT |
|||
| Utilities |
Bash: OS shell command, busybox: Linux normal command utility collection, shadow: User/Password management utility, telnet: Telnet client program, ftp: FTP client program, SCP: Secure file transfer client program, iptables: Firewall service manager |
||||
| Utilities only for Super Series |
ss.apply, ss.filter, ss.portmenu, ss.channel, ss.logger, ss.save, ss.configuration_manager, ss.port, ss.tcp, ss.modemmenu, ss.server_lock, ss.connect, ss.nfs_mount, ss.edit, ss.port_factory_default, port[number]_reset |
||||
| Daemon |
snmpd: snmpd agent daemon, telnetd: Telnet server daemon, inetd: TCP server manager program, goahead: Web server daemon, sshd: Secure shell server |
||||
| Tool Chain |
Gcc (V2.95.3): C/C++ PC Cross Compiler, GDB (V5.0.0): Source Level Debug Server, Glibc (V2.2.3): POSIX standard |
||||
|
PCMCIA |
ATA flash memory card, 802.11b Wireless LAN card, 10/100 Base-TX LAN Card, Modem card |
- |
|||
|
Security |
User ID & Password, HTTPS, Secure terminal interface: SSH, Data Encryption: SSLv2/v3, TLS v1, 3DES and RC4, IP address filtering, SCP |
||||
|
Modem emulation |
Full support for AT commands |
||||
| Management |
Web, Telnet/SSH, Serial console port, HelloDevice Manager, O/S support: Windows 98/ME/NT/2000/XP |
||||
| System log and statistics |
System logging to SYSLOG/NFS server or CF card, Logging by email support. Full-featured system status display support |
||||
| Firmware |
Stored in Flash memory and Downloadable via serial console or telnet or web |
||||
|
Diagnostic LED |
Power, Ready, 10/100 Base Link, Act, Serial InUse (without SS100) /Rx/ Tx for each port, |
||||
|
Power |
5VDC, 1.5A @ 5V |
110~250 VAC, 50/60Hz 43W |
5VDC, 0.5A @ 5VDC |
||
|
Environmental |
Operating temperature: 0°C to 50°C |
||||
|
Humidity: 90% Non-condensing |
|||||
|
Physical Properties |
245x 153x 30 (mm) |
432 x 193 x 44.5 (mm) |
100 x 72 x 25 (mm) |
||
|
Weight: 1.5kg |
Weight: 2.8kg |
Weight: 240g |
|||
|
Approvals |
FCC (A), CE, MIC |
||||
| Technical downloads | Click here for technical information download page | ||||
| For detail technical information please visit Sena's web site www.sena.com or send e-mail to support@comet.bg. |
| For additional information about prices and delivery terms for ordering Sena products, please contact Comet Electronics! |
|
Industrial Device Servers |
| For application-specific requirements such as Industrial automation, Industrial Input/Output management and UPS management, Sena offers a full range of external device servers - IALink Series, RHIO Series and UPSLink Series. |
| The name of each product in the table below contains a link to the datasheet in .pdf format. |
| Industrial Device Servers | |||
| Product | IALink100 | IALink100-Modbus | UPSLink100 |
![]() |
![]() |
![]() |
|
| Price |
|
|
|
| Serial Interface / MIB | Screw terminal block connector |
UPS with serial data port. UPS Interface: Male DB9 serial port connector |
|
| Serial speeds 1200bps to 115Kbps | |||
| Flow control: Hardware RTS.CTS | Flow control: None |
MIB II (RFC1213) UPS MIB (RFC1628) |
|
|
Signals: RS485: Data+, Data- RS232: Rx, Tx, RTS, CTS,DTR, DSR, GND RS422: Rx+, Rx-, Tx+, Tx- |
Signals: RS485: Data+, Data- RS232: Rx, Tx, GND RS422: Rx+, Rx-, Tx+, Tx- |
||
| Network Interface | 10 Base-T with RJ45 Ethernet connector | 10 Base-T/100 Base Fast Ethernet with RJ45 Ethernet connector, Automatic detection | |
| Supports static and dynamic IP address | |||
| Protocols | ARP, IP/ICMP, TCP, UDP, Telnet, DNS, SMTP, DHCP client, PPPoE | ARP, IP/ICMP, TCP, Telnet, DHCP client | ARP, IP/ICMP, TCP, UDP, Telnet, DNS, Dynamic DNS, SNMP,HTTP, HTTPS, DHCP client, PPPoE, SNMP, NTP, RFC1628 & MIB II |
| Security | User ID & Password | User ID & Password | User ID & Password |
| IP address filtering | |||
| Data Encryption: Static key based 3DES | HTTPS | ||
| Management | Telnet, Serial console port, HelloDevice Manager | NMS, Web, Telnet, Serial console port, HelloDevice Manager | |
| Diagnostic LED | 2 for Power, Ready, 2 for 10Base-T Link, Act, 2 for Serial Rx, Tx | Power, Ready, Ethernet Link, Act, Serial Rx, Tx | |
| Power | DC power supply via Screw terminal block, 7.5 ~ 30 VDC | 5.0 V DC | |
| 300mA / 7.5V DC | 400mA (nom.) | ||
| Environmental | Operating temperature: 0°C to 50°C | ||
| Humidity: 90% Non-condensing | |||
| Physical Properties | Dimension (LxWxH): 100x 50 x 68(mm) | Dimension (LxWxH): 100x 72 x 25 (mm) | |
| Weight: 290g | Weight: 240g | ||
| Approvals | FCC (A), CE, MIC | ||
| Technical downloads | Click here for technical information download page | ||
| For detail technical information please visit Sena's web site www.sena.com or send e-mail to support@comet.bg. |
| For additional information about prices and delivery terms for ordering Sena products, please contact Comet Electronics! |
|
Remote I/O Managers |
| The Rhio10 and Rhio232 are a Remote Ethernet and serial I/O Manager, which allow to connect Input and Output devices to 10 Base-T Ethernet network (Rhio10) or to a Sena Device Server through the RS232 interface (Rhio232). |
| The name of each product in the table below contains a link to the datasheet in .pdf format. |
|
Remote I/O Managers |
||
| Product |
RHIO10 |
RHIO232 |
![]() |
![]() |
|
|
Price |
|
|
|
Interface |
10 Base-T Ethernet with RJ45 connector Supports static and dynamic IP address |
RS232 with RJ45 connector Baud rate : 9,600 bps, Flow control : None, Data : 8 bit, Stop : 1 bit |
|
Digital Input |
Number of channels: 12, Input type: Voltage, Input circuitry: Optically isolated photo-coupler, Input range: 0V ~ ±24V, OFF 0V ~ ±1.2V, ON ±3.3V ~ ±24V, Sampling rate: 20ms, Isolation voltage: 5KV |
|
|
Digital Output |
Number of channels: 10, Output type: Relay, Rated load: 3A/240VAC, Insulation resistance: 1000MΩ Min (DC500V), Electrical life expectancy: 100,000 operations, Contact Resistance: 100ms Max, Isolation voltage (coil and contact): 4KV, Reaction within 10ms |
|
|
Analog Input |
Number of channels: 4, Effective resolution: 10-bit, Input type: Voltage, Direct coupling, Input range: 0V ~Aref (Analog reference voltage, 2~5V), Sampling rate: 1000 samples/sec |
|
|
Protocols |
ARP, IP/ICMP, TCP, Telnet, DHCP client, PPPoE |
- |
|
Management |
Rhio Manager Windows Utility, Serial Console or Telnet |
Rhio Manager Windows Utility |
|
Software Support |
Windows MFC DLL library, I/O configuration, I/O status monitoring/control |
|
|
Diagnostic LED |
Power, Link, Act, Digital Output, 1~10, Digital Input, 1~12, Analog Input, 1~4 |
Power, Serial Rx, Serial Tx, Digital Output, 1~10, Digital Input, 1~12, Analog Input, 1~4 |
|
Power |
9V ~ 48VDC, Max. 5W |
|
|
Environmental |
Operating temperature: 0°C to 50°C |
|
|
Physical Properties |
Dimensions (L x W x H): 137 x 111 x 58 (mm) |
|
|
Weight: 730g |
||
|
Certification |
FCC (A), CE, MIC |
|
| Technical downloads | Click here for technical information download page | |
| For detail technical information please visit Sena's web site www.sena.com or send e-mail to support@comet.bg. |
| For additional information about prices and delivery terms for ordering Sena products, please contact Comet Electronics! |
|
|||||||||